Canon Color imageRUNNER C1030 Starter Manual page 43

11
Connect the machine and your
computer with a USB cable (A).
–
The USB cable is not included.
–
If the Found New Hardware Wizard
appears, click [Cancel] and
continue the installation.
12
Installation of the printer driver is
completed and the installation of the
fax driver will begin.
13
14
15
–
If you are using a shared printer in
the Print Server (Point and Print)
environment, it is necessary to install
the Canon Driver Information Assist
Service in the server computer to set
up the printer configuration
automatically or use Department ID
Management.
–
If the Canon Driver Information
Assist Service is already installed on
your computer, this screen is not
displayed.
–
If you are using an operating system
equipped with Windows Firewall, the
following message box may appear.
If you want to use Canon Driver
Information Assist Service, click [Yes].
If you select [No], you cannot use
Canon Driver Information Assist
Service.
3 Set Up Computers and Software
16
Select [Canon iR C1028/1030 (FAX)].
17
18
Select the USB port you want to use
from the [Port] drop-down list. If you
want to add a port, click [Add Port]
and then select the USB port that you
want to add.
41