Set The Date And Time - Canon FaxPhone L90 Starter Manual

Set Up the Machine

Set the Date and Time

Before using the machine, you MUST set the current date and time. The current date and time settings are used as
standard timer settings for functions that require them.
1
Press [Menu].
2
Press [ ] or [ ] to select <8 TIMER
SETTINGS>, then press [OK].
3
Press [ ] or [ ] to select <1 DATE&TIME
SETTING>, then press [OK].
4
Use the numeric keys to enter the time (in 24-
hour/military time format) and date (month/
day/year), then press [OK].
Ex.
D A T E & T I M E S E T T I N G
1 5 : 5 0 1 2
If you accidentally enter an incorrect number, press [
[ ] to move the cursor to the number that needs
correcting and overwrite it.
10
3 1 ' 0 7
] or
Entering Information
●
Numeric keys: Enters numbers.
‒
[ ] or [ ]: Moves the cursor position.
‒
[OK]: Confirms the entry.
‒
5
Press [Stop/Reset] to return to the standby
mode.
–
You can select one of the following three date formats in
<2 DATE TYPE SELECT>.
–
<MM/DD/YYYY>
–
<DD/MM YYYY>
–
<YYYY MM/DD>
–
By default, <4 DAYLIGHT SV.TIME> in the <8 TIMER
SETTINGS> menu is set to <OFF>.
If you want to set <4 DAYLIGHT SV.TIME> in the <8
TIMER SETTINGS> menu to <ON>, see Chapter 1,
"Before Using the Machine, " in the Reference Guide.
The LCD display turned off:
●
The machine may enter the sleep mode while you are setting up the
machine. Press [Energy Saver] to turn the machine back on and continue
the setup.