[Function Button]; [Audio Setting] - Panasonic PT-VW340Z Operating Instructions Manual

VW435N series, VW440 series, VW430 series, VX505N series, VX510 series, VX500 series, VW330 series,
[VX500 SERIES]
VX400NT series, VX400 series, VX41 series
[EZ570 SERIES] EZ570 series, EW630 series, EW530 series, EX600 series, EX500 series
[VW431D] VW431D series
4) Press the <ENTER> button.

[FUNCTION BUTTON]

The function assigned to the <FUNCTION> button of the remote control is displayed. You can also release the assigned
setting.
Releasing assigned function to the <FUNCTION> button
1) Press as to select [FUNCTION BUTTON].
2) Press the <ENTER> button.
The [FUNCTION BUTTON] screen is displayed.
f
3) Select [DISABLE], then press
4) When the confirmation message is displayed, select [OK] and press the <ENTER> button.
Note
You can also cancel the assigned settings by displaying the on-screen menu, selecting the menu item to be canceled (main
f
menu, submenu, or details menu), and then pressing the <FUNCTION> button for at least 3 seconds.

[AUDIO SETTING]

You can perform more detailed setting for Audio.
Adjusting the volume
1) Press as to select [AUDIO SETTING].
2) Press the <ENTER> button.
The [AUDIO SETTING] screen is displayed.
f
3) Press as to select [VOLUME].
4) Press qw to adjust the level.
Operation
Press the w button.
Press the q button.
Setting the mute
1) Press as to select [AUDIO SETTING].
2) Press the <ENTER> button.
The [AUDIO SETTING] screen is displayed.
f
3) Press as to select [MUTE].
4) Press qw to switch the item.
[ON]
[OFF]
Setting the audio output during standby
1) Press as to select [AUDIO SETTING].
2) Press the <ENTER> button.
The [AUDIO SETTING screen is displayed.
f
3) Press as to select [IN STANDBY MODE].
4) Press qw to switch [IN STANDBY MODE].
70 - ENGLISH
Chapter 4 Settings - [PROJECTOR SETUP] menu
the <ENTER> button.
Adjustment
Turns up the volume.
Turns down the volume.
Turns off the volume temporarily.
Output the audio.
Range
0 ~ 63