[Test Pattern]; [Filter Counter]; [Initialize All] - Panasonic PT-VW340Z Operating Instructions Manual

[TEST PATTERN]

Displays the test pattern built-in to the projector.
Settings of position, size, and other factors will not be reflected in test patterns. Make sure to display the input signal before
performing various adjustments.
1) Press as to select [TEST PATTERN].
2) Press the <ENTER> button.
The [TEST PATTERN] screen is displayed.
f
3) Press qw to switch the items.
The items will switch each time you press the button.
f
ALL WHITE → COLOR BARS → WHITE CROSS ON BLACK BACKGROUND → BLACK CROSS ON THE WHITE
BACKGROUND → CROSS HATCH → ALL WHITE →...
When you press the <MENU> button or <RETURN> button, it will display the sub menu of [PROJECTOR SETUP].
f
Note
The initial setting is ALL WHITE. The initial screen is
f

[FILTER COUNTER]

This function is used to reset the filter use time and set the notification display.
1) Press as to select [FILTER COUNTER].
2) Press the <ENTER> button.
The [FILTER COUNTER] screen is displayed.
f
[FILTER COUNTER]
[TIMER]
[FILTER COUNTER
RESET]
Setting [TIMER]
1) Press as to select [TIMER].
2) Press qw to switch the setting of the timer.
The items will switch each time you press the button.
f
[OFF] → [1000 H] → [2000 H] → [3000 H] → [4000 H] → [5000 H] → [6000 H]
[FILTER COUNTER RESET]
1) Press as to select [FILTER COUNTER RESET].
The [FILTER COUNTER RESET] screen is displayed.
z
2) Press the <ENTER> button.
3) When the confirmation is displayed, press

[INITIALIZE ALL]

Return various setting values to their factory default settings.
1) Press as to select [INITIALIZE ALL].
The [INITIALIZE ALL] screen is displayed.
z
2) Press the <ENTER> button.
3) When the confirmation is displayed, press
The [POWER OFF] screen is displayed.
z
4) Press the <ENTER> button.
The operation is disabled except for turning off the power.
z
Note
The projector will enter into the standby status to reflect the setting values when [INITIALIZE ALL] is executed.
f
72 - ENGLISH
Chapter 4 Settings - [PROJECTOR SETUP] menu
Displays the using time of the filter.
Sets the timer when you want to display an alert message of filter replacement.
Resets the filter counter.
CROSS HATCH if you have assigned it to the <FUNCTION> button.
qw to select [OK] and then press the <ENTER> button.
qw to select [OK] and then press the <ENTER> button.