[Picture] Menu; [Picture Mode]; [Contrast] - Panasonic PT-VW340Z Operating Instructions Manual

[PICTURE] menu

On the menu screen, select [PICTURE] from the main menu, and select an item from the submenu.
Refer to "Navigating through the menu" (xpage 45) for the operation of the menu screen.
After selecting the item, press asqw to set.

[PICTURE MODE]

You can switch to the desired picture mode suitable for the image source and the environment in which the projector is used.
1) Press as to select [PICTURE MODE].
2) Press qw or the <ENTER> button.
The [PICTURE MODE] individual adjustment screen is displayed.
f
3) Press qw to switch the item.
The items will switch each time you press the button.
f
[STANDARD]
[DYNAMIC]
[BLACKBOARD]
[WHITE BOARD]
[CINEMA]*
1
[NATURAL]*
2
*1 Only for the movie-based signals.
*2 Only for the still image signals.
Note
The factory default picture mode is [DYNAMIC] for still image input signals and [STANDARD] for movie-based input signals.
f
sRGB is an international standard (IEC61966-2-1) for color reproduction defined by IEC (International Electrotechnical
f
Commission).

[CONTRAST]

You can adjust the contrast of the colors.
1) Press as to select [CONTRAST].
2) Press qw or the <ENTER> button.
The [CONTRAST] individual adjustment screen is displayed.
f
3) Press qw to adjust the level.
Operation
Press the ► button.
Press the ◄ button.
Attention
Adjust [BRIGHTNESS] first when you need to adjust [BRIGHTNESS] and [CONTRAST].
f
Chapter 4 Settings - [PICTURE] menu
The picture becomes suitable for moving images in general.
The light output is maximized for use in bright areas.
The picture becomes suitable for projecting on a black board.
The picture becomes suitable for projecting on a white board.
The picture becomes suitable for movie sources.
The picture complies with sRGB.
Adjustment
Brightens the screen and makes the color deeper.
Darkens the screen and makes the color lighter.
Adjustment range
-32 ~ +32
ENGLISH - 49