[Lamp Power]; [Eco Management] - Panasonic PT-VW340Z Operating Instructions Manual

[LAMP POWER]

Switch the brightness of the lamp according to the operating environment of the projector or the purpose.
1) Press as to select [LAMP POWER].
2) Press qw to switch the item.
The items will switch each time you press the button.
f
[NORMAL]
[ECO1]
[ECO2]
Note
You can reduce power consumption and operation noise, and extend the life of the lamps by setting to [
f
[ECO1], or by setting to [ECO1] rather than [NORMAL].

[ECO MANAGEMENT]

This function optimizes lamp power according to the operating status to reduce power consumption.
1) Press as to select [ECO MANAGEMENT].
2) Press the <ENTER> button.
The [ECO MANAGEMENT] screen is displayed.
f
3) Press as to select one item.
Setting [AUTO POWER SAVE] in step 3)
Set whether or not to enable the three functions, [AMBIENT LIGHT DETECTION], [SIGNAL DETECTION] and [AV MUTE
DETECTION].
Note
[AUTO POWER SAVE] cannot be set when the [LAMP POWER] is set
f
4) Press qw to switch the [AUTO POWER SAVE].
[ON]
[OFF]
5) Press as to select one item.
[AMBIENT LIGHT DETECTION]
[SIGNAL DETECTION]
[AV MUTE DETECTION]
6) Press qw to switch the item.
The items will switch each time you press the button.
f
[ON]
[OFF]
Note
Lamp power cannot reduced automatically in the following cases:
f
- When [LAMP POWER] is set
- When the lamp lit or the setting of [LAMP POWER] is completed, etc.
When [AUTO POWER SAVE] is set to [OFF], [AMBIENT LIGHT DETECTION], [SIGNAL DETECTION] and [AV MUTE
f
DETECTION] cannot be set.
[AMBIENT LIGHT DETECTION] will not work correctly when placing some objects on the ambient luminance sensor.
f
Setting [POWER MANAGEMENT] in step 3)
Set the operation as following if there is no signal input.
1) Press as to select [POWER MANAGEMENT].
2) Press qw to switch the item.
The items will switch each time you press the button.
f
68 - ENGLISH
Chapter 4 Settings - [PROJECTOR SETUP] menu
Select when high luminance is required.
Select when high luminance is not required.
Select when high luminance is not required and the operation sound is needed more quiet.
Enables power-saving mode.
Disables power-saving mode.
Adjusts the lamp power according to the ambient brightness.
Drops the lamp power when no signal is input.
Drops the lamp power in the AV mute mode.
Enables above setting.
Disables above setting.
to [ECO2]
to [ECO2].
ECO2] rather than