[Name Change]; [Network Control]; [Amx D. D.]; [Crestron Connected(Tm)] - Panasonic PT-VW340Z Operating Instructions Manual

[NAME CHANGE]

You can change the projector name, for example, when using the DHCP server.
1) Press as to select [NAME CHANGE].
2) Press the <ENTER> button.
The [NAME CHANGE] screen is displayed.
f
3) Select characters with the
name.
Select [ALL DELETE] to delete all the entered characters, or press the <DEFAULT> button on the remote control to
f
delete a character on the cursor in the entry field.
4) Select [OK] with the
To cancel the change of the name, select [CANCEL] and press the <ENTER> button.
f
Note
[Name ] (
f

[NETWORK CONTROL]

Set when you want to control the projector from a computer connected to the network.
1) Press as to select [NETWORK CONTROL].
2) Press qw to switch the item.
The items will switch each time you press the button.
f
[ON]
[OFF]

[AMX D. D.]

Set to [ON] to control with the controller of AMX Corporation.
Setting this function to [ON] enables detection through "AMX Device Discovery". For details, refer to the website of AMX
Corporation.
URL http://www.amx.com/
1) Press as to select [AMX D. D.]
2) Press qw to switch the item.
The items will switch each time you press the button.
f
[ON]
[OFF]

[Crestron Connected(TM)]

Set to [ON] to control with Crestron Connected™ of Crestron Electronics, Inc.
1) Press as to select [Crestron Connected(TM)].
2) Press qw to switch the item.
The items will switch each time you press the button.
f
[ON]
[OFF]
Chapter 4 Settings - [NETWORK] menu
asqw buttons and press the <ENTER> button to enter the projector
buttons and press the <ENTER> button.
as
is 4-digit number) is set before the projector leaves the factory.
This function is enabled. Web control, PJLink control, the command control of the LAN are enabled.
This function is disabled.
This function is enabled.
This function is disabled.
This function is enabled.
This function is disabled.
ENGLISH - 77