[Screen Setting]; [Startup Logo] - Panasonic PT-VW340Z Operating Instructions Manual

3) Press as to select [MODE].
4) Press qw to switch the item.
The items will switch each time you press the button.
f
[CC1]
[CC2]
[CC3]
[CC4]
Note
Closed captions are a function that is mainly used in North America to display text information with video signals. Captions
f
may not be displayed depending on the connected devices or software being played back.
[CLOSED CAPTION SETTING] can only be selected if an NTSC or 480i YC
f
If [CLOSED CAPTION SETTING] is set to [ON], the brightness of image may be changed according to the external devices
f
or the used content of the closed caption corresponding connection.
If a closed caption signal of the selected mode is input, the text is not displayed even when the [SECURITY] menu → [TEXT
f
DISPLAY] ( page 74) is set to [ON].
Æ
Closed captions are not displayed when the menu screen is displayed.
f

[SCREEN SETTING]

(Only for PT-VW340Z)
Set the screen size.
When changing the aspect of a projected image, correct to the optimum image position for the set screen. Set as necessary
for the screen in use.
1) Press as to select [SCREEN SETTING].
2) Press the <ENTER> button.
The [SCREEN SETTING] screen is displayed.
f
3) Press qw to switch the [SCREEN FORMAT] item.
The items will switch each time you press the button.
f
[SCREEN FORMAT]
[16:10]
[16:9]
4) Press as to select [SCREEN POSITION].
If [SCREEN FORMAT] is set to [16:10], adjustment of [SCREEN POSITION] are not available.
f
5) Press qw to adjust the [SCREEN POSITION].
The items will switch each time you press the button.
f
[HIGH]
[CENTER]
[LOW]

[STARTUP LOGO]

Set the logo display when the power is turned on.
1) Press as to select [STARTUP LOGO].
2) Press qw to switch the item.
The items will switch each time you press the button.
f
[DEFAULT LOGO]
[USER LOGO]
[OFF]
Note
The startup logo will disappear in approximately
f
To create/register the [USER LOGO] image, use "Logo Transfer Software" included in the supplied CD-ROM.
f
If you do not register the image of the [USER LOGO], the startup logo will not be displayed even if the [STARTUP LOGO] is
f
set to [USER LOGO].
62 - ENGLISH
Chapter 4 Settings - [DISPLAY OPTION] menu
Displays CC1 data.
Displays CC2 data.
Displays CC3 data.
Displays CC4 data.
Description
The projected aspect ratio is 16:10.
The projected aspect ratio is 16:9.
The image which aspect ratio is 16:9 will displayed at the top.
The image which aspect ratio is 16:9 will displayed in the center.
The image which aspect ratio is 16:9 will displayed at the bottom.
Displays the Panasonic logo.
Displays the image registered by the user.
Disables the startup logo display.
30 seconds.
C signal is input.
B R
Range when [SCREEN POSITION] is selected
Cannot be adjusted.
Adjusts the vertical position.