About Your Projector; Remote Control - Panasonic PT-VW340Z Operating Instructions Manual

About your projector

Remote control

1 < v/b> Button
Turn the projector on or off. (
2 Input Selection Buttons: <COMPUTER 1>,
<COMPUTER 2>, <HDMI>, <VIDEO>, <S-VIDEO>.
These buttons are used to select the input signal.
( Æ page 40)
3 Buttons, <ENTER> Button
asqw
Navigate the MENU display.
4 <DEFAULT> Button
Resets the content of the sub-menu to the factory default.
Æ
( page 46)
5 <MENU> Button
Open or close the On-Screen Menu. (
6 <ID SET> Button
Sets the ID number of the remote control to use for a
system using multiple projectors.
7 <FREEZE> Button
Pauses the projected image and mute the audio
temporarily. ( Æ page 40)
8 <D.ZOOM +/–> Buttons
Zoom in and out the images. (
9 <VOL +/–> Buttons
Adjust the volume of the speaker. (
Attention
Do not drop the remote control.
f
Avoid contact with liquids.
f
Do not attempt to modify or disassemble the remote control.
f
20 - ENGLISH
Chapter 1 Preparation - About your projector
1
2
3
4
5
6
7
8
9
Æ
pages 36,37)
Æ
page 45)
Æ page 41)
Æ
page 42)
19
18
17
16
15
14
13
12
11
10
10 <KEYSTONE> Button
Correct keystone distortion. (
11 <P IN P> Button ( Only for PT-VW340Z)
Operate the P IN P function.
12 <AV MUTE> Button
Used to turn off the audio and video temporarily.
Æ
( page 41)
13 <P-TIMER> Button
Operate the P-timer function. (
14 <MUTE> Button
Used to mute the audio. (
15 <ID ALL> Button
Used to simultaneously control all the projectors with
one remote control for a system using multiple projectors.
16 <RETURN> Button
Return to the previous menu or cancel the setting.
17 <FUNCTION> Button
Assigns a frequently used operation as a shortcut button.
18 <AUTO SETUP> Button
Automatically adjusts the image display position while
Æ
projecting the image. (
19 Remote control signal emitter
Æ page 39)
Æ
page 41)
Æ
page 42)
page 39)