Panasonic PT-VW340Z Operating Instructions Manual page 88

Example of E-mail sent for an error
=== Panasonic projector report(ERROR) ===
Projector Type
Serial No
-----
FAN
FAN (INTAKE)
FAN (EXHAUST)
FAN (LAMP)
INTAKE AIR TEMPERATURE
EXHAUST AIR
OPTICS MODULE TEMPERATURE
LAMP REMAIN TIME
LAMP STATUS
APERTURE (CONTRAST-SHUTTER)
AIR FILTER
(Error code 00 40 00 00 00 00 00 08)
Intake air temperature
Exhaust air temperature
Optics module temperature
PROJECTOR RUNTIME
LAMP NORMAL
LAMP ECO1
LAMP ECO2
LAMP REMAIN
-------- Current status ---------
MAIN VERSION
NETWORK VERSION
SUB VERSION
LAMP STATUS
INPUT
----- Wired Network configuration -----
DHCP Client
IP address
MAC address
----- Memo -----
[Port set up] page
Set the port number used for command control.
Click [Detailed set up] → [Port set up].
1 [COMMAND PORT]
Set the port number used for command control.
2 [Wake on LAN PORT]
When [STANDBY MODE] is set to [NETWORK], set the
port number used for the Wake on LAN function.
88 - ENGLISH
Chapter 4 Settings - [NETWORK] menu
Mail with the contents shown below is sent when an error has occurred.
: PT-VW340Z
: 000000000
check system -----
TEMPERATURE
: 31 degC /
: 37 degC /
: 39 degC / 102 degF
800 H
100 H
500 H
200 H
3400 H
1.00
1.00
1.00
LAMP=OFF
NETWORK
OFF
192.168.10.100
04:20:9A:00:00:00
[ OK ]
[ OK ]
[ OK ]
[ OK ]
[ OK ]
[ OK ]
[ OK ]
[ OK ]
[ OK ]
[ OK ]
[ FAILED ]
87 degF
98 degF
3 [Submit]
Update the settings.
1
2
3