Powering On/Off; Connecting The Power Cord - Panasonic PT-VW340Z Operating Instructions Manual

Powering on/off

Connecting the power cord

Make sure that the supplied power cord is securely fixed to the projector body to prevent it from being removed easily.
For details of power cord handling, refer to "Read this first!" (
Attaching
1) Check the shapes of the <AC IN> terminal on the back of the projector body and the power cord
connector and insert the plug completely in the correct direction (until you hear the side tabs click in
place).
Removing
1) Turn off the projector, and then remove the AC power cord from the electrical outlet.
2) Remove the AC power cord connector from the <AC IN> terminal on the projector while pressing the
tabs on its sides.
34 - ENGLISH
Chapter 3 Basic Operations - Powering on/off
Æ page 5).