APPENDIX C
SRX240 Services Gateway Interface Cable
Specifications and Connector Pinouts
Interface Cable and Wire Specifications for the SRX240 Services Gateway
Related
Documentation
RJ-45 Connector Pinouts for the SRX240 Services Gateway Ethernet Port
Copyright © 2013, Juniper Networks, Inc.
This appendix includes the following topics:
Interface Cable and Wire Specifications for the SRX240 Services Gateway on page 149
RJ-45 Connector Pinouts for the SRX240 Services Gateway Ethernet Port on page 149
RJ-45 Connector Pinouts for the SRX240 Services Gateway Console Port on page 151
Table 42 on page 149
lists the specifications for the cables that connect to ports.
Table 42: Cable and Wire Specifications for Ports
Port
Cable Specification
Console
RS-232 (EIA-232) serial
port
cable
Ethernet
CAT-5e (Category 5)
port
cable or equivalent
suitable for 100BASE-T
operation
RJ-45 Connector Pinouts for the SRX240 Services Gateway Ethernet Port on page 149
RJ-45 Connector Pinouts for the SRX240 Services Gateway Console Port on page 151
Figure 24 on page 150
shows the RJ-45 cable connector pinouts for Ethernet ports.
Maximum
Cable/Wire Required
Length
One 6-ft (1.83-m) length
6 ft (1.83 m)
with DB-9/RJ-45
connectors
One 15-ft (4.57-m)
328 ft
length with RJ-45/RJ-45
(100 m)
connectors
Device
Receptacle
RJ-45
RJ-45
149