Srx240 Services Gateway Chassis Serial Number And Agency Labels; Contacting Customer Support To Obtain Return Materials Authorization - Juniper SRX240 Hardware Manual

SRX240 Services Gateway Chassis Serial Number and Agency Labels

SRX240 Services Gateway Mini-Physical Interface Module Serial Number Label
Related
Documentation

Contacting Customer Support to Obtain Return Materials Authorization

Copyright © 2013, Juniper Networks, Inc.
Appendix D: Contacting Customer Support and Returning the SRX240 Services Gateway Hardware
NOTE: In the
show chassis hardware
Module (Mini-PIM) slot number is reported as an FPC number, and the
Mini-PIM number (always 0) is reported as the PIC number.
Most components also have a serial number ID label attached to the
component body.
The SRX240 Services Gateway has a serial number ID label and an agency label located
on the back of the chassis as shown in
Figure 26: Location of SRX240 Serial Number and Agency Labels
Mini-Physical Interface Modules (Mini-PIMs) are field-replaceable on the SRX240 Services
Gateway. Each Mini-PIM has a unique serial number. The serial number label is located
on the right side of the Mini-PIM, when the Mini-PIM is horizontally oriented (as it would
be installed on the device).
The exact location might be slightly different on different Mini-PIMs, depending on the
placement of components on the Mini-PIM.
Packing the SRX240 Services Gateway and Components for Shipment on page 156
Return Procedure for the SRX240 Services Gateway on page 153
Information You Might Need to Supply to Juniper Networks Technical Assistance Center
on page 156
This topic includes the following sections:
Information You Might Need to Supply to Juniper Networks Technical Assistance
Center on page 156
Juniper Networks Technical Assistance Center on page 156
Packing the SRX240 Services Gateway and Components for Shipment on page 156
command, the Mini-Physical Interface
Figure 26 on page 155.
155