Srx240 Services Gateway Boot Devices And Dual-Root Partitioning; Scheme; Boot Devices - Juniper SRX240 Hardware Manual

SRX240 Services Gateway Hardware Guide
Related
Documentation
SRX240 Services Gateway Boot Devices and Dual-Root Partitioning Scheme

Boot Devices

18
Table 13: DC Power Supply Feed LEDs (continued)
DC Input
Input A Input B
Input is connected but Input is normal.
has failed because the
power supply fuse has
failed or input voltage
is low.
Input is normal. Input is connected
but has failed
because the power
supply fuse has failed
or input voltage is
low.
Input breaker open or Input is normal.
no DC input connected.
Input has failed. Input has failed.
No input. No input.
(1) No output because of output side failure or an open connection.
SRX240 Services Gateway Chassis on page 7
SRX240 Services Gateway Front Panel and Back Panel Views on page 9
SRX240 Services Gateway Built-In Interfaces on page 12
SRX240 Services Gateway Boot Devices and Dual-Root Partitioning Scheme on page 18
SRX240 Services Gateway Power Supply on page 20
SRX240 Services Gateway Cooling System on page 21
This topic includes the following sections:
Boot Devices on page 18
Dual-Root Partitioning Scheme on page 19
The SRX240 Services Gateway can boot from the following storage media (in the given
order of priority):
Internal NAND flash memory (default; always present)
DC Output LED A
Output is Red
normal. (blinking)
Output is Green
normal.
Output is Red
normal. (blinking)
No output. Red
(blinking)
No output. Off
Copyright © 2013, Juniper Networks, Inc.
LED B
Green
Red
(blinking)
Green
Red
(blinking)
Off