Juniper SRX240 Hardware Manual page 22

SRX240 Services Gateway Hardware Guide
Related
Documentation
8
Table 5: Physical Specifications for the SRX240 Services
Gateway (continued)
Specification Value
Chassis depth 15 in. (38.1 cm)
Chassis weight
Average Power
consumption
Altitude No performance degradation at upto 10,000 ft (3048 m)
Relative humidity 5% to 90%, noncondensing
Temperature Normal operation ensured in temperature range 32°F (0°C) through
104°F (40°C)
Nonoperating storage temperature in shipping container: -40°F
(-40°C) to 158°F (70°C)
Seismic Designed to meet Telcordia Technologies Zone 4 earthquake
requirements
Maximum thermal
output
NOTE:
Noise level Less than 70 dB(A) as per EN ISO 7779
NOTE: Before removing or installing components of a functioning services
gateway, attach an electrostatic discharge (ESD) strap to an ESD point and
fasten the other end of the strap around your bare wrist. Failure to use an
ESD strap could result in damage to the services gateway.
SRX240 Services Gateway Description on page 3
SRX240 Services Gateway with AC power supply and no PoE
support models: 11.24 lb. (5.1 kg)
SRX240 Services Gateway with AC power supply and PoE support
models: 12.34 lb. (5.6 kg)
SRX240 Services Gateway with DC power supply models: 12.56 lb.
(5.7 kg)
SRX240 Services Gateway with AC power supply and no PoE
support models: 74 watts
SRX240 Services Gateway with AC power supply and PoE support:
86 watts (excluding PoE load)
SRX240 Services Gateway with DC power supply models: 72 watts
SRX240 Services Gateway with AC power supply and no PoE
support models: 427 BTU/hour
SRX240 Services Gateway with AC power supply and PoE support
models: 560 BTU/hour (Excluding PoE load)
SRX240 Services Gateway with DC power supply models: 409
BTU/hour
These specifications are estimates and subject to change.
Copyright © 2013, Juniper Networks, Inc.