Checking The Service Light; Resetting The Service Light - Invacare ILIFTEE User Manual

I-Lift™

4.7 Checking the Service Light

This procedure applies to the ILIFTEE models only.
Each time the lift is assembled, and before using the lift, the
service light should be checked.
1. Assemble the lift.
Examine the control box A to see if the service light B is flashing.
2.
3. Refer to the table.
Service Light Initial Assembly
Flashing Reset the service
light. Refer to
4.8 Resetting the
Service Light, page
18.
Not Flashing
18
Reassembly
The lift requires
service. Contact
your local Invacare
dealer for service.
The lift is ready for use.

4.8 Resetting the Service Light

This procedure should only be performed after performing
4.7 Checking the Service Light, page 18.
Locate the handset A.
1.
Press and hold the UP button B and DOWN button C at the
2.
same time for five seconds.
You will hear a sound when the service light has been
reset.
1171892-A