Removing The Oil Filter - KTM 690 DUKE EU Owner's Manual

SERVICE WORK ON THE ENGINE

Removing the oil filter

x
16.4
Warning
Danger of scalding Engine oil and gear oil get very hot when the motorcycle is ridden.
–
Wear appropriate protective clothing and safety gloves. In case of burns, rinse immediately with lukewarm water.
–
Place a suitable container under the engine.
–
Remove the oil drain plug
–
Completely drain the engine oil.
700186-01
–
Thoroughly clean the oil drain plug with a magnet.
–
Mount the oil drain plug with the magnet and seal ring and tighten it.
Guideline
Oil drain plug with magnet (Duke)
Oil drain plug with magnet (Duke R)
700187-01
with the magnet and seal ring.

M12x1.5
M12x1.5
136
20 Nm
(14.8 lbf ft)
20 Nm
(14.8 lbf ft)