Changing The High Beam Bulb - KTM 690 DUKE EU Owner's Manual

ELECTRICAL SYSTEM

Changing the high beam bulb

13.9
Note
Damage to reflector Reduced luminance.
–
Grease on the lamp will evaporate due to the heat and be deposited on the reflector. Clean the lamp and keep it free of grease before
mounting.
–
Position the headlight mask. Mount and tighten screws
Guideline
Screw, headlight mask
–
Check lighting function.
700169-12
–
Switch off all power consumers and switch off the engine.
–
Remove screws
700169-10
.

.

M6 5 Nm (3.7 lbf ft)
113