Running In The Engine - KTM 690 DUKE EU Owner's Manual

PREPARING FOR USE
Warning
Danger of accidents Failure of brake system.
–
If the foot brake lever is not released, the brake linings drag continuously. The rear brake may fail due to overheating. Take your
foot off the foot brake lever when you are not braking.
Info
When using your vehicle, remember that others may feel disturbed by excessive noise.
–
Make sure that the pre-delivery inspection work has been carried out by an authorized KTM workshop.
You receive a delivery certificate and the service record at vehicle handover.
–
Before your first trip, read the entire operating instructions carefully.
–
Get to know the controls.
–
Adjust the basic position of clutch lever. (
–
Adjust the basic position of hand brake lever. (
–
Adjust the basic position of the foot brake lever.
–
Get used to handling the motorcycle on a suitable piece of land before making a longer trip. Try also to ride as slowly as possible to get
a better feel for the vehicle.
–
Hold the handlebars firmly with both hands and keep your feet on the footrests when riding.
–
Run the engine in.

Running in the engine

6.2
–
During the running-in phase, do not exceed the specified engine speed and engine performance.
p. 76)
p. 78)
( p. 83)
x
40