ELECTRICAL SYSTEM
Checking the high beam headlight adjustment
13.13
A
0 0 A
–
The rider, with luggage and a passenger if applicable, now sits down on the motorcycle.
–
Check the low beam headlight adjustment.
For a ready-to-operate motorcycle with a rider, and with luggage and a passenger if
applicable, the light-dark boundary must lie exactly on the lower mark.
»
If the boundary between light and dark does not meet specifications:
–
Adjust the light range of the low beam headlight. (
–
Stand the vehicle upright on a horizontal surface in front of a light wall and make a
mark at the height of the center of the high beam headlight.
–
Make another mark at a distance
Guideline
0 0 B
B
Distance
–
Position the vehicle vertically at a distance
high beam.
Guideline
Distance
–
The rider, with luggage and a passenger if applicable, now sits down on the motorcycle.
–
Check the high beam headlight adjustment.
For a ready-to-operate motorcycle with a rider, and with luggage and a passenger if
applicable, the center of the light cone must lie exactly on the lower mark.
0 0 B
B
»
If the center of the light cone is not located where specified:
–
Adjust the light range of the high beam headlight. (
400575-10
p. 119)
under the first mark.
5 cm (2 in)
in front of the wall and switch on the
5 m (16 ft)
p. 120)
118