Filling/Bleeding The Cooling System - KTM 690 DUKE EU Owner's Manual

COOLING SYSTEM
Warning
Danger of poisoning Coolant is poisonous and a health hazard.
–
Avoid contact between coolant and skin, eyes and clothing. If it gets into your eyes, rinse immediately with water and contact
a doctor. Wash affected skin areas immediately with soap and water. If coolant is swallowed, contact a doctor immediately.
Change clothes that have come into contact with coolants. Keep coolant out of the reach of children.

Filling/bleeding the cooling system

14.5
Warning
Danger of poisoning Coolant is poisonous and a health hazard.
–
Avoid contact between coolant and skin, eyes and clothing. If it gets into your eyes, rinse immediately with water and contact
a doctor. Wash affected skin areas immediately with soap and water. If coolant is swallowed, contact a doctor immediately.
Change clothes that have come into contact with coolants. Keep coolant out of the reach of children.
–
Remove the seat. (
–
Reinstall the fuel tank. (
–
Stand the motorcycle upright.
–
Place a suitable container under the engine.
–
Remove screw
–
Completely drain the coolant.
–
Mount screw
Guideline
Plug, drain hole of water pump (Duke)
700184-01
Plug, drain hole of water pump (Duke R)
x
p. 66)
p. 67)
. Take off the radiator cap.

with a new seal ring and tighten it.

M10x1 15 Nm
(11.1 lbf ft)
M10x1 15 Nm
(11.1 lbf ft)
127