WHEELS, TIRES
Removing the front wheel
12.1
x
–
Raise the motorcycle with the rear wheel stand. (
–
Raise the motorcycle with the front wheel stand. (
–
Remove screws
–
Press back the brake linings with a light lateral tilting of the brake caliper on the brake
disc. Pull the brake caliper carefully back from the brake disc and hang it to one side.
Info
Do not pull the hand brake lever while the brake caliper is removed.
700155-10
–
Loosen screws
–
Unscrew screw
spindle out of the axle clamp. Remove screw
Warning
Danger of accidents Reduced braking efficiency caused by damaged brake
discs.
–
–
700156-10
Holding the front wheel, withdraw the wheel spindle. Take the front wheel out of the
fork.
and spacers
.
and
.
about 6 turns and press your hand on the screw to push the wheel
Always lay the wheel down in such a way that the brake disc is not damaged.
p. 65)
p. 64)
.
88