Advertisement
Quick Links
Advertisement
Related Manuals for KTM 690 Duke EU 2017
Summary of Contents for KTM 690 Duke EU 2017
- Page 1 SETUP INSTRUCTIONS 2017 690 Duke 690 Duke R Art. no. 3213613en...
- Page 3 KTM accepts no liability for delivery options, devi- ations from illustrations and descriptions, misprints, and other errors.
-
Page 4: Means Of Representation
MEANS OF REPRESENTATION Symbols used The meaning of specific symbols is described below. Indicates an expected reaction (e.g. of a work step or a function). Indicates an unexpected reaction (e.g. of a work step or a function). Indicates a page reference (more information is provided on the specified page). Indicates information with more details or tips. - Page 5 SETUP Unpacking and setting up the vehicle – Remove the box and the plastic packaging. Info To avoid damaging the motorcycle while mounting the handlebar, leave the film on the fuel tank until all of the work on the motorcycle has been fin- ished.
- Page 6 5) – Install the battery. ( p. 6) – Refuel. ( p. 8) – Prepare the vehicle according to the specifications in the KTM Dealer.net for han- dover to the customer. – Set the kilometers or miles. ( p. 8)
-
Page 7: Recharging The Battery
WORK Removing the passenger seat – Insert the ignition key in seat lock and turn it clockwise. – Raise the rear of the passenger seat, push it towards the rear, and remove it upward. – Remove the ignition key from the seat lock. V00043-10 Mounting the passenger seat –... - Page 8 WORK Preparatory work – Switch off the ignition by turning the ignition key to the position – Remove the passenger seat. ( p. 5) – Disconnect the negative cable of the battery. ( p. 7) Main work – Connect the battery charger to the battery. Set the battery charger. Alternative 1 Battery charger XCharge-professional EU (00029095050) Alternative 2...
- Page 9 WORK Finishing work – Mount the passenger seat. ( p. 5) – Set the time and date. ( p. 7) Disconnecting the negative cable of the battery Preparatory work – Switch off the ignition by turning the ignition key to the position –...
- Page 10 WORK – Press the BACK button. Time and date are saved. Setting the kilometers or miles Info If the unit is changed, the value is retained and converted accordingly. Make the setting according to the country. Condition The motorcycle is stationary. –...
- Page 11 WORK – Switch off the engine. – Open the filler cap. ( p. 9) – Fill the fuel tank with fuel up to the lower edge of the filler neck. Total fuel tank 14 l (3.7 US gal) Super unleaded (ROZ 95/RON 95/PON capacity, approx.
- Page 12 WORK – Remove the ignition key and close the cover.
-
Page 13: Technical Data
TECHNICAL DATA Chassis tightening torques – Screw, headlight EJOT 2 Nm (1.5 lbf ft) Screw, side stand switch 2 Nm (1.5 lbf ft) Loctite ® 243™ – Remaining screws, chassis 5 Nm (3.7 lbf ft) – Retaining clamp, brake line 3 Nm (2.2 lbf ft) –... - Page 14 TECHNICAL DATA Loctite ® 243™ Screw, footrest bracket, rear M8x30 25 Nm (18.4 lbf ft) Screw, footrest bracket, rear M8x50 25 Nm (18.4 lbf ft) Loctite ® 243™ – Screw, fork stub 15 Nm (11.1 lbf ft) Screw, front brake disc 30 Nm (22.1 lbf ft) Loctite ®...
- Page 15 SUBSTANCES Super unleaded (ROZ 95/RON 95/PON 91) Standard/classification – DIN EN 228 (ROZ 95/RON 95/PON 91) Guideline – Only use unleaded super fuel that matches or is equivalent to the specified fuel grade. – Fuel with an ethanol content of up to 10 % (E10 fuel) is safe to use. Info Do not use fuel containing methanol (e.
- Page 16 *3213613en* 3213613en 11/2016 KTM Sportmotorcycle GmbH 5230 Mattighofen/Austria Photo: Mitterbauer/KTM http://www.ktm.com...