Yamaha YZ250F(P)/LC Owner's Service Manual page 292

Table of Contents

Advertisement

2
1
1
1
4 - 18
CARBURETOR
Fully turn in the accelerator pump adjust-
G
ing screw 3.
Check that the link lever 4 has free play
G
b by pushing lightly on it.
Gradually turn out the adjusting screw
G
while moving the link lever until it has no
more free play.
Carburetor installation
1. Install:
Carburetor joint 1
G
3 Nm (0.3 m · kg, 2.2 ft · lb)
NOTE:
Install the projection a on the cylinder
between the carburetor joint slots b.
2. Install:
Carburetor 1
G
NOTE:
Install the projection between the carburetor
joint slots.
3. Tighten:
Screw (air filter joint) 1
G
3 Nm (0.3 m · kg, 2.2 ft · lb)
Screw (carburetor joint) 2
G
3 Nm (0.3 m · kg, 2.2 ft · lb)
4. Install:
Throttle cable cap 1
G
ENG

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Yz250f(p)Yz250f

Table of Contents