Yamaha YZ250F(P)/LC Owner's Service Manual page 192

ENGINE OIL REPLACEMENT
4. Remove:
G
G
G
G
5. Remove:
G
G
G
G
G
6. Inspect:
G
7. If the oil filter is to be replaced during this
oil change, remove the following parts
and reinstall them.
Replacement steps:
Remove the oil filter element cover 1 and
G
oil filter element 2.
Check the O-rings 3, if cracked or dam-
G
aged, replace them with a new one.
Install the oil filter element and oil filter ele-
G
ment cover.
3 - 16
Oil tank cap 1
Frame oil drain bolt 2
Crankcase oil drain bolt 3
Oil filter element drain bolt 4
Drain the crankcase and oil tank
(frame) of its oil.
Lower engine bracket
Oil hose clamp 1
Bolt (oil hose) 2
Oil hose 3
Oil strainer (frame) 4
Oil strainer (frame)
Clogged → Blow.
Oil filter element cover:
10 Nm (1.0 m • kg, 7.2 ft • lb)
INSP
ADJ