User's Guide; Belt Clip; Power On/Off; Key Lock - Xblue Networks PCS digital User Manual

Wireless Key Telephone Handset

User's Guide

The Wireless Handset takes the place of the 31-Button key telephone; it has an easy to
read 3-line LCD, 3 interactive soft buttons and a Hot Keypad. 6-programmable buttons
can be assigned as a CO Line, an extension or a feature, allowing calls to be answered,
transferred, placed on hold, or forwarded from the Wireless Handset, just like the 31-
Button Key Telephone.
The "Hot Keypad" is a step saver dialing feature, which allows calls to be placed without
having to press extra buttons. Simply dial the extension that you are trying to reach, or
press the CO line and dial the telephone number. There is no need to press the speaker or
talk button before dialing.

Belt Clip

To help eliminate misplacing the Wireless Handset, we've included a belt clip. The belt
clip is attached to the back of the handset by inserting the plastic posts, found on the belt
clips, into the indentation found on the handset.

Power On/Off

To turn the power on or off, press the hold button for 3 seconds. When powered up, the
back lit LCD display, will show the current date and time, extension number and ring
mode. To conserve energy, the back lit display will turn off in 10 seconds and after 20
seconds, the handset will go into sleep mode and only displaying, ring mode, current
battery charge, and the extension number. Any activity on the telephone will wake the
call up, and the handset will become fully functional.

Key Lock

Press the Flash key for 3 seconds, to lock and unlock the keys on the handset. This will
prevent the handset from dialing unintended digits. Although the keys are locked,
incoming calls can still be answered by pressing the talk or speaker keys. The "Ç" in the
display is the indication that the handset is locked. To unlock the keys, after pressing the
Flash button for 3 seconds, the third soft button will have to be pressed as well.

Answer a Call

Intercom calls can be answered in hands free mode, allowing you to converse with the
calling party without press any buttons. If the handset rings, press either the "Talk" or
the "Speaker" button to answer the call. Depending on the "Auto Pickup" parameter, you
can also answer a call just by removing the handset from the charging base.

Hold

To place a call on hold, press the hold button. To retrieve the call press the hold button
again, or select the CO Line on hold.
- 29 -