RED Connector from
Battery to Controller
Front Battery
Tie Wrap
RED Front POSITIVE (+)
Battery Terminal Mounting
Screw, Nut and Fuse Hardware
(Terminal Cap Shown)
RED Battery Connector
RED Rear POSITIVE (+) Battery
Terminal Mounting Screw, Nut and
Fuse Hardware*
*NOTE: Terminal cap
removed for clarity.
RED Connector from
Battery to Controller
Front Battery
Tie Wrap
RED Front POSITIVE (+)
Battery Terminal Mounting
Screw, Nut and Fuse Hardware
(Terminal Cap Shown)
RED Battery Connectors
RED Rear POSITIVE (+) Battery
Terminal Mounting Screw, Nut and
Fuse Hardware*
*NOTE: Terminal cap removed for clarity.
Removing
1. Place the wheelchair in a well ventilated area where work can be performed without
risking damage to carpeting or floor covering.
Part No. 1125038
DETAIL "A" MKIV Electronics
Front of Wheelchair
Rear of Wheelchair
DETAIL "B" MK
Front of Wheelchair
Rear of Wheelchair
FIGURE 11.2 Installing/Removing the Batteries
Screw, Nut and Fuse Hardware
Battery Terminal Mounting Screw,
and MK6i Electronics
5
Screw, Nut and Fuse Hardware
Battery Terminal Mounting Screw,
105
SECTION 11—BATTERIES
RED Controller Connector
BLACK Front NEGATIVE (-)
Battery Terminal Mounting
(Terminal Cap Shown)
Tie
BLACK Battery Connector
GREY Rear NEGATIVE (-)
Nut and Fuse Hardware*
Rear Battery
Retaining Strap
RED Controller Connector
(Not Shown)
BLACK Front NEGATIVE (-)
Battery Terminal Mounting
(Terminal Cap Shown)
Tie
BLACK Battery Connectors
GREY Rear NEGATIVE (-)
Nut and Fuse Hardware*
Rear Battery
Retaining Strap
®
Pronto
M91™and M94™