Table of Contents
Advertisement
S E C T I O N 3 — A R M R E S T S
After ANY adjustments, repair or service and BEFORE use, make sure all attaching
hardware is tightened securely - otherwise injury or damage may occur.
Removing/Installing and Adjusting Removable Armrests
(n°1)
NOTE: For this procedure, refer to FIGURE 3.1.
Removing/Installing removable armrest (n°1)
NOTE: To remove the removable armrest, reverse this procedure.
1. Align the vertical tube with the socket in the T
2. Slide the vertical tube into the T
bracket until the height adjustment screw
rests on the top on the T
Adjusting removable armrest
Height
NOTE: For this procedure, refer to FIGURE 3.1.
1. Remove the removable armrest. Refer to
Removing/Installing removable armrest
paragraph.
2. Unscrew the Height adjustment screw (M5)
3. Adjust to the desired height adjustment.
Secure tightly the Height adjustment screw
(M5).
4. Both T-arm should be set to the same
position if required.
5. Reinstall the removable armrest. Refer to
Removing/Installing removable armrest
paragraph.
W A R N I N G
Arm
-
Arm bracket.
-
1 1
SECTION 3—ARMRESTS
Arm bracket on the wheelchair frame.
-
FIGURE 3.1 Removable armrest
Armrest
Height adjustment
screw (M5)
T-Arm
T-Arm bracket
Advertisement
Table of Contents
