Connecting - Invacare Pronto M91 Service Manual

Connecting

MKIV RII/MK Joysticks
5
NOTE: For this procedure, refer to FIGURE 12.1 on page 114.
1. Align the joystick connector with the controller connector.
2. Secure the joystick connector to the controller connector using the thumb screws on
the controller connector.
MKIV "A" Joysticks
NOTE: For this procedure, refer to FIGURE 12.1 on page 114.
1. Align the joystick connector with the controller connecter.
2. Secure the joystick connector to the controller connector using the threaded collar on
the controller connector.
The excess joystick cable must be coiled and tie-wrapped to the rear of the seat
frame to ensure that cable does NOT become entangled or damaged during normal
operation of seating system - otherwise injury or damage may result.
3. If necessary, coil and tie wrap excess joystick cable to rear of seat frame.
Part No. 1125038
WARNING
113
SECTION 12—ELECTRONICS
®
Pronto M91™and M94™