Invacare® AVIVA™ FX Series
3. Clean terminals by using a battery cleaning tool, wire
brush, or medium grade sand paper.
Upon completion, areas should be shiny, not
dull.
4. Carefully dust off all metal particles.
5.4 Getting in and out of Mobility Device
– The armrest must be removed or swiveled
up in order to get into or out of the mobility
device from the side.
5.4.1 Removing Standard Armrest for Side Transfer
This chapter relates to the standard armrest. For
more information about other armrests, see the user
manual of the seating system.
Depending on version, the armrest is fixed with one of
several fastener options:
•
Clamping lever
•
Hand screw
•
Locking pin
•
Locking screw
The graphic below serves as an example.
Depending on which side the remote is installed on, you
need to disconnect the remote cable before removing the
armrest.
30
1. Pull plug A of remote cable to disconnect remote.
2. If necessary, remove remote cable from clip B.
3. Loosen fastener C.
4. Remove armrest from holder.
5.4.2 Information About Getting in and out
Fig. 5-2
Fig. 5-1
Fig. 5-3
1663936-A