Information Gauge Display Diagnostics; Service Indicator Light Diagnostics - Invacare Pronto M91 Service Manual

Information Gauge Display Diagnostics

DISPLAY
Information
Gauge
Display

Service Indicator Light Diagnostics

1 E 01 User Fault
2 E02 Battery Fault
Part No. 1125038
SECTION 3—SAFETY INSPECTION/TROUBLESHOOTING
DESCRIPTION
All LEDs are off.
All LEDs are on.
Left RED LED is flashing.
Left to Right "chase"
alternating with steady
display.
All LEDs are flashing slowly. Joystick has detected Out-
00 Stall Timeout or user error.
00 Recharge batteries or replace.
25
DEFINITION
Power is off.
Power is on.
Battery charge is low.
Joystick is in
programming, inhibit and/
or charging mode.
of-Neutral-at-Power-Up
mode.
Release joystick to neutral and try again.
Check the batteries and cable.
Try charging the batteries.
Batteries may require replacing.
COMMENTS
Fewer than three LEDs on
implies reduced battery
charge.
The batteries should be
charged as soon as
possible.
The steady LEDs indicate
the current state of the
battery charge.
Release the joystick back
to Neutral.
Pronto® M91™and M94™