Section 13-Wire Routing; Mkiv Wire Routing - Invacare Pronto M91 Service Manual

SECTION 13—WIRE ROUTING
After ANY adjustments, repair or service and BEFORE use, make sure that all
attaching hardware is tightened securely - otherwise injury or damage may result.
Before performing any maintenance, adjustment or service verify that On/Off
switch on the joystick is in the OFF position.

MKIV Wire Routing

NOTE: For this procedure, refer to FIGURE 13.1.
LEFT Motor
Lead
Tie-Wraps
Controller
Charger Cable
Charger Cable
Bracket, Mounting
Screws and Nuts
Wheelchair Frame
Charger Cable
Part No. 1125038
WARNING
Controller Battery Cable
FIGURE 13.1 MKIV Wire Routing
121
SECTION 13—WIRE ROUTING
RIGHT Motor
Lead
Walking Beam
Joystick Cable
Wheelchair Frame
NOTE: Batteries not shown
®
Pronto M91™and M94™
Tie-Wraps