Iopn.inputprovider Set Arbitration Timeout - HP NetServer AA 4000 Administrator's Manual

Chapter 5

IOPn.InputProvider Set Arbitration Timeout

This command configures input arbitration for the server. When arbitration is enabled, CE input
is allowed only from one IOP at a time. During the arbitration timeout, CE input is allowed from
only one IOP (effectively blocking input from the other IOP). At the end of each arbitration
interval, input control is available to switch to the next IOP where mouse movement or
keyboard activity is detected.
By default, arbitration is disabled, allowing either or both tuples to provide input to the server.
Command IOPn.InputProvider Set Arbitration Timeout x
Console Syntax MTCCONS IOPn.InputProvider Set Arbitration Timeout x
Variables n – the ID number of the IOP (1 or 2)
x – the timeout value that you want to set. The timeout range is 0 to 300
seconds. If the timeout is 0, arbitration is disabled (default), and input is
accepted from both IOPs.
See Also
IOPn.InputProvider Show Arbitration Timeout
132
Commands