Chapter 9
Shutting Down a CE
To shut down a CE:
Step
Action
1
Make sure that the other CE is active.
2
From Endurance Manager issue the CEx
Disable command.
3
Power off the CE if desired.
Shutting Down the CE Operating System
Before you shut down the CE operating system, consider the fact that this procedure removes
your server from service. Make sure that you schedule an appropriate time and that you have
completed any necessary backups before starting this procedure.
Note:
You must complete the following procedure onsite. You cannot shut down the
CE operating system using remote Endurance Manager.
To shut down the CE operating system:
Step
Action
1
Make sure that the keyboard and mouse are
available at the CE.
2
Issue the command Windows NT Shutdown
without Restart.
Notes
If the other CE is not active, shutting down the only
active CE removes the server from service.
A disabled element will attempt to rejoin the server.
Notes
If necessary, enter the hotkey sequence to switch
control to the CE operating system
Maintenance
213