Iopn.inputprovider Disable Automatic Switchover; Iopn.inputprovider Disable Hotkey - HP NetServer AA 4000 Administrator's Manual

Chapter 5

IOPn.InputProvider Disable Automatic Switchover

This command prevents input devices from automatically switching over from the IOPs to the
CEs during CE boot, as described in
issuing this command, if you want input devices to switch to the CE (during CE boot), you must
manually switch over the input devices, using either the hotkey, the
Input Devices IOP command, or the
By default, automatic switchover for input devices is enabled.
Command IOPn.InputProvider Disable Automatic Switchover
Console Syntax MTCCONS IOPn.InputProvider Disable Automatic Switchover
n – the ID number of the IOP (1 or 2)
Variables
See Also
IOPn.InputProvider Enable Automatic Switchover
IOPn.InputProvider Set Input Devices CE
IOPn.InputProvider Set Input Devices IOP
IOPn.InputProvider Show Automatic Switchover

IOPn.InputProvider Disable Hotkey

This command disables hotkeys that can be used to toggle input devices between the local IOP
and the CE for the tuple. By default, hotkeys are enabled.
Command IOPn.InputProvider Disable Hotkey
Console Syntax MTCCONS IOPn.InputProvider Disable Hotkey
Variables n – the ID number of the IOP (1 or 2)
See Also
IOPn.InputProvider Enable Hotkey
IOPn.InputProvider Show Hotkey
HP NetServer AA Boot Process 17
IOPn.InputProvider Set Input Devices CE
Commands
in Chapter 2. After
IOPn.InputProvider Set
command.
129