Iop Shutdown Operation - HP NetServer AA 4000 Administrator's Manual

Chapter 5

IOP Shutdown Operation

This command removes the specified IOP from the configuration, shuts down the IOP, and
automatically reboots it. When it reboots, the IOP rejoins the server configuration. If you do not
want the IOP to rejoin, power it off or use the IOP Disable command.
Command IOPn Shutdown Operation From IOPx
Console Syntax MTCCONS IOPn Shutdown Operation From IOPx
-disable_safeguard
Note: The
n – the ID number of the IOP (1 or 2) to shut down
Variables
x – the ID number of the IOP (1 or 2) that issues the shutdown command
Results Check the Windows NT Event Viewer for a message that indicates that the
CE has been shut down, disabled, or removed from service.
See Also
IOP Disable Operation
IOP Enable Operation
IOPn.Monitor Show Configuration
-disable_safeguard
online or for the CE boot disk if the CE is running.
argument is needed only for the last IOP
Commands
95