HP NetServer AA 4000 Administrator's Manual page 235

Chapter 9
Step Action
6 Make sure that any components affected by
this procedure are active or online.
Reenable any faulted or disabled
components (page
7 Confirm that the new Ethernet cable
operates properly:
• Establish a network connection to
validate that the connection is
operating properly.
• Issue an Endurance Manager
IOPy.Ethernet
• Issue an Endurance Manager
IOPy.Ethernet
Ethernet connection disabled in the
previous step.
• Using the Endurance Manager main
window, confirm that the Ethernet
connection that uses the replacement
cable is active and primary.
Notes
Use Endurance Manager for this step.
241).
Use Endurance Manager for these steps.
For example, use Windows NT Explorer to connect
to a network node. Copy some files to and from the
server during the following steps.
This disables the Ethernet connection that
Disable
command. maintained network connectivity while you
completed the previous steps.
Enable
command for the
It appears bright green.
If the Ethernet connection supported by the
replacement cable remains active and primary, the
cable that you replaced is fully operational.
Maintenance
219