REMOVE USER {ALL | "<user name>" | CERTIFICATE "<user name>"}
•
Description:
Removes a user from the system and/or any certificate mapped to the user. If you specify ALL, then
the command is run for all users except the default system accounts.
•
Access level/Bay level:
OA administrator
•
Restrictions:
The <user name> is case sensitive.
o
You cannot remove the Administrator account.
o
SET MINIMUM PASSWORD LENGTH
•
Command:
SET MINIMUM PASSWORD LENGTH <length>
•
Description:
Sets a minimum length for passwords. When set, a user's password must contain at least the number
of characters specified.
•
Access level/Bay level:
OA administrator
•
Restrictions:
The minimum password length can be set between 3 and 40 characters.
SET PASSWORD
•
Command:
SET PASSWORD ["<password>"]
•
Description:
Sets the password of the user that executed the command. If you do not provide a password on the
command line, you are prompted for one.
•
Access level/Bay level:
All
•
Restrictions:
The <password> must be three to eight characters long for firmware 1.00 through 1.30 and 3 to 40
characters long for firmware 2.00 and later. The character set includes all printable characters.
SET SESSION TIMEOUT
•
Command:
SET SESSION TIMEOUT <timeout>
•
Description:
Sets the number of minutes before inactive sessions are removed. The default setting is 1440.
User account commands 24