Yamaha YZ85(T) Owner's Service Manual page 164

Table of Contents

Advertisement

È
BRAKE FLUID LEVEL INSPECTION
5PA30460
É
5PA30470
Install the brake caliper 0 and tighten the
G
pad pins A.
Bolt (brake caliper):
23 Nm (2.3 m • kg, 17 ft • lb)
Pad pin:
18 Nm (1.8 m • kg, 13 ft • lb)
NOTE:
Apply the LOCTITE
per rear side).
3. Inspect:
Brake fluid level
G
Refer to "BRAKE FLUID LEVEL INSPEC-
TION" section.
4. Check:
Brake pedal operation
G
A softy or spongy feeling → Bleed brake
system.
Refer to "BRAKE SYSTEM AIR BLEED-
ING" section.
BRAKE FLUID LEVEL INSPECTION
1. Place the brake master cylinder (reservoir
tank) so that its top is in a horizontal posi-
tion.
2. Inspect:
Brake fluid level
G
Fluid at lower level a → Fill up.
È Front
É Rear
Recommended brake fluid:
DOT #4
WARNING
Use only designated quality brake fluid to
G
avoid poor brake performance.
Refill with same type and brand of brake
G
fluid; mixing fluids could result in poor
brake performance.
Be sure that water or other contaminants
G
do not enter master cylinder when refill-
ing.
Clean up spilled fluid immediately to
G
avoid erosion of painted surfaces or plas-
tic parts.
3 - 21
INSP
ADJ
®
on the bolt (brake cali-

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Yz85lwtYz85Yz85lw

Table of Contents