Do not remove the radiator cap when the
engine and radiator are hot. Scalding hot
fluid and steam may be blown out under
When the engine has cooled, open the radi-
ator cap by the following procedure:
Place a thick rag, like a towel, over the radi-
ator cap, slowly rotate the cap counter-
clockwise to the detent. This procedure
allows any residual pressure to escape.
When the hissing sound has stopped,
press down on the cap while turning coun-
terclockwise and remove it.
Radiator core 1
Obstruction → Blow out with compressed
air through rear of the radiator.
Bent fin → Repair or replace.
ASSEMBLY AND INSTALLATION
Radiator breather hose 1
To radiator 2.
Bolt (radiator) 2
4 - 4