Yamaha YZ450F(T) Owner's Service Manual page 524

Hide thumbs Also See for YZ450F(T):
Table of Contents

Advertisement

HANDLEBAR
EC5B5000
ASSEMBLY AND INSTALLATION
Handlebar
1. Install:
• Handlebar 1
• Handlebar holder 2
• Bolt (handlebar holder) 3
NOTE:
• The upper handlebar holder should be
installed with the punched mark a forward.
• Install the handlebar so that the marks b are
in place on both sides.
• First tighten the bolts on the front side of the
handlebar holder, and then tighten the bolts
on the rear side.
2. Install:
• Grip (left) 1
Apply the adhesive to the handlebar 2.
NOTE:
• Before applying the adhesive, wipe off
grease or oil on the handlebar surface a
with a lacquer thinner.
• Install the grip (left) to the handlebar so that
the line b between the two arrow marks
faces straight upward.
5 - 44
CHAS
28 Nm (2.8 m · kg, 20 ft · lb)

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Yz450f

Table of Contents