Yamaha YZ450F(T) Owner's Service Manual page 388

KICK AXLE AND SHIFT SHAFT
EC4C5301
Shift shaft
1. Install:
NOTE:
Apply the engine oil on the roller and shift
shaft.
2. Install:
NOTE:
When installing the shift pedal onto the shift shaft,
be sure that the center of the shift pedal is about
1.1 mm (0.04 in) a above the top of the footrest.
Kick axle assembly
1. Install:
NOTE:
• Apply the molybdenum disulfide oil on the
inner circumferences of the kick gear and
ratchet wheel.
• Align the punch mark a on the ratchet wheel
with the punch mark b on the kick axle.
2. Install:
NOTE:
Make sure the stopper a of the torsion spring
fits into the hole b on the kick axle.
4 - 74
• Roller 1
• Collar 2
• Torsion spring 3
• Shift shaft 4
• Shift pedal 1
• Bolt (shift pedal)
12 Nm (1.2 m · kg, 8.7 ft · lb)
• Kick gear 1
• Plain washer 2
• Circlip 3
New
• Ratchet wheel 4
• Spring 5
• Plain washer 6
• Circlip 7
New
To kick axle 8.
• Torsion spring 1
To kick axle 2.
ENG