Speed; Stopbits - HP 6125XLG Command Reference Manual

<Sysname> system-view
[Sysname] user-interface vty 0 4
[Sysname-ui-vty0-4] undo shell
Disable ui-vty0-4 , are you sure? [Y/N]:y
[Sysname-ui-vty0-4]

speed

Use speed to set the transmission rate (also called the "baud rate") on a user interface.
Use undo speed to restore the default.
Syntax
speed speed-value
undo speed
Default
The transmission rate is 9600 bps.
Views
AUX user interface view, console user interface view
Predefined user roles
network-admin
Parameters
speed-value: Transmission rate in bps. The transmission rates available for asynchronous serial interfaces
include: 300 bps, 600 bps, 1200 bps, 2400 bps, 4800 bps, 9600 bps, 19200 bps, 38400 bps, 57600
bps, and 1 15200 bps.
Usage guidelines
The configuration terminal and the device must be configured with the same transmission rate to
communicate.
Examples
# Set the transmission rate to 19200 bps for user interface AUX 0.
<Sysname> system-view
[Sysname] user-interface aux 0
[Sysname-ui-aux0] speed 19200

stopbits

Use stopbits to specify the number of stop bits for a character.
Use undo stopbits to restore the default.
Syntax
stopbits { 1 | 1.5 | 2 }
undo stopbits
Default
One stop bit is used.
31