Login Management Commands; Activation-Key - HP 6125XLG Command Reference Manual

Login management commands

The device supports the FIPS mode that complies with NIST FIPS 140-2 requirements. Support for features,
commands, and parameters might differ in FIPS mode and non-FIPS mode. For more information about
FIPS mode, see Security Configuration Guide.
Unless otherwise noted, devices in the configuration examples are operating in non-FIPS mode.
Telnet is not supported in FIPS mode.

activation-key

Use activation-key to define a shortcut key for starting a terminal session.
Use undo activation-key to restore the default.
Syntax
activation-key character
undo activation-key
Default
Pressing Enter starts a terminal session.
Views
AUX user interface view, console user interface view
Predefined user roles
network-admin
Parameters
character: Specifies the shortcut key. It can be a single character, a key sequence, or the ASCII code
value (in the range of 0 to 127) of the character or key sequence.
Usage guidelines
To display the shortcut key you have defined, use the display current-configuration | include
activation-key command.
Examples
# Configure character s as the shortcut key for starting a terminal session on the AUX user interface.
<Sysname> system-view
[Sysname] user-interface console 0
[Sysname-ui-console0] activation-key s
To verify the configuration:
1. Exit the console session.
[Sysname-ui-console0] return
<Sysname> quit
2. Log in again to the AUX user interface.
The following message appears:
12