Display Archive Configuration - HP 6125XLG Command Reference Manual

Make sure the replacement configuration file is created by using the configuration archive function
•
or the save command on the device.
If the configuration file is not created on the device, make sure the configuration file content format
•
is fully compatible with the device.
Make sure the replacement configuration file is not encrypted.
•
Examples
# Replace the running configuration with the configuration in the my_archive_1.cfg configuration file.
<Sysname> system-view
[Sysname] configuration replace file my_archive_1.cfg
Current configuration will be lost, save current configuration? [Y/N]:n
Now replacing the current configuration. Please wait...
Succeeded in replacing current configuration with the file my_archive_1.cfg.

display archive configuration

Use display archive configuration to display configuration archive information, including the archive
directory, archive prefix, archive interval, maximum number of archives, and saved archives.
Syntax
display archive configuration
Views
Any view
Predefined user roles
network-admin
network-operator
Examples
# Display configuration archive information.
<Sysname> display archive configuration
Location: flash:/archive
Filename prefix: my_archive
Archive interval in minutes: 120
Maximum number of archive files: 10
Saved archive files:
No. TimeStamp
1 Wed Jan 15 14:20:18 2012
2 Wed Jan 15 14:33:10 2012
# 3 Wed Jan 15 14:49:37 2012
'#' indicates the most recent archive file.
Next archive file to be saved: my_archive_4.cfg
Table 15 Command output
Field
Location
FileName
my_archive_1.cfg
my_archive_2.cfg
my_archive_3.cfg
Description
Absolute path of the directory for saving running-configuration
archives.
127