Archive Configuration Location - HP 6125XLG Command Reference Manual

archive configuration max
•
• display archive configuration

archive configuration location

Use archive configuration location to configure the directory and file name prefix for archiving the
running configuration.
Use undo archive configuration location to restore the default.
Syntax
archive configuration location directory filename-prefix filename-prefix
undo archive configuration location
Default
No configuration archive directory or configuration archive file name prefix has been set.
Views
System view
Predefined user roles
network-admin
Parameters
directory: Specifies a configuration archive directory, a case-insensitive string of 1 to 63 characters. The
directory must take the format storage-medium-name:/folder-name. This directory must already exist on
the master, and its directory name must not include member ID information.
filename-prefix: Specifies a file name prefix for configuration archives, a case-insensitive string of 1 to 30
characters. Valid characters are letters, digits, underscores (_), and hyphens (-).
Usage guidelines
Before archiving the running configuration, either manually or automatically, you must configure a
directory and file name prefix for configuration archives.
In an IRF fabric, the configuration archive function saves the running configuration only on the master
device. To make sure the system can archive the running configuration after a master/subordinate
switchover, create the directory on all IRF members.
Configuration archives take the file name format prefix_serial number.cfg, for example,
20080620archive_1.cfg and 20080620archive_2.cfg. The serial number is automatically assigned from
1 to 1000, increasing by 1. After the serial number reaches 1000, it restarts from 1.
After you change the file directory or file name prefix, or reboot the device, the old configuration archives
are regarded as common configuration files, the configuration archive counter resets, and the display
archive configuration command no longer displays them. The serial number for new configuration
archives starts at 1.
The undo archive configuration location command not only removes the configuration archive directory
and file name prefix settings but also disables the configuration archive function (both manual and
automatic methods), restores the default settings of the archive configuration interval and archive
configuration max commands, and clears all configuration archives.
123