Display Scheduler Logfile - HP 6125XLG Command Reference Manual

copy startup.cfg backup.cfg
Job name: backupconfig
Job name: creat-VLAN100
system-view
vlan 100
// The output shows that the device has three jobs: the first has one command, the second has no
command, and the third has two commands. Jobs are separated by blank lines.

display scheduler logfile

Use display scheduler logfile to display job execution log information.
Syntax
display scheduler logfile
Views
Any view
Predefined user roles
network-admin
network-operator
Examples
# Display job execution log information.
<Sysname> display scheduler logfile
Logfile Size: 1902 Bytes.
Job name
Schedule name
Execution time
Completion time : Tue Dec 27 10:44:47 2012
--------------------------------- Job output -----------------------------------
<Sysname>system-view
System View: return to User View with Ctrl+Z.
[Sysname]interface range ten-gigabitethernet1/1/5 to ten-gigabitethernet1/1/7
[Sysname-if-range]shutdown
Table 22 Command output
Field
Logfile Size
Schedule name
Execution time
Completion time
Job output
: shutdown
: shutdown
: Tue Dec 27 10:44:42 2012
Description
Size of the log file, in bytes.
Schedule to which the job belongs.
Time when the job was started.
Time when the job was completed. If the job has never been executed or the job has no
commands, this field is not displayed.
Commands in the job and their output.
159