Configuration File Management Commands; Archive Configuration - HP 6125XLG Command Reference Manual

Configuration file management commands

The device supports the FIPS mode that complies with NIST FIPS 140-2 requirements. Support for features,
commands, and parameters might differ in FIPS mode and non-FIPS mode. For more information about
FIPS mode, see Security Configuration Guide.
Unless otherwise noted, devices in the configuration examples are operating in non-FIPS mode.

archive configuration

Use archive configuration to manually archive the running configuration to the configuration archive
directory.
Syntax
archive configuration
Views
User view
Predefined user roles
network-admin
Usage guidelines
Before manually archiving the running configuration, you must use the archive configuration location
command to specify a directory as the configuration archive directory and specify an archive name
prefix.
Configuration archive facilitates configuration rollback. It provides manual and automatic methods for
saving the running configuration as checkpoint references. For more information about the archiving
mechanism, see the section about configuration rollback in Fundamentals Configuration Guide.
To ensure system performance:
If the device configuration does not change frequently, manually archive the running configuration
•
as needed.
• If the device configuration changes frequently, configure automatic archiving with an interval longer
than 1440 minutes (24 hours).
Examples
# Archive the running configuration.
<Sysname> archive configuration
Save the running configuration to an archive file. Continue? [Y/N]: Y
The archive configuration file myarchive_1.cfg is saved.
Related commands
archive configuration interval
•
archive configuration location
•
archive configuration max
•
• display archive configuration
121