Flow-Control - HP 6125XLG Command Reference Manual

You can execute this command multiple times, but only the most recent configuration takes effect. To view
the current shortcut key definition, use the display current-configuration command.
Examples
# Define character a as the shortcut key for terminating a task.
<Sysname> system-view
[Sysname] user-interface aux 0
[Sysname-ui-aux0] escape-key a
To verify the configuration:
1. Ping IP address 192.168.1.49, specifying the -c keyword to set the number of ICMP echo request
packets to 20.
<Sysname> ping -c 20 192.168.1.49
PING 192.168.1.49: 56
Reply from 192.168.1.49: bytes=56 Sequence=1 ttl=255 time=3 ms
Reply from 192.168.1.49: bytes=56 Sequence=2 ttl=255 time=3 ms
2. Press a.
The task is terminated, and the system returns to user view.
--- 192.168.1.49 ping statistics ---
2 packet(s) transmitted,2 packet(s) received,0.00% packet loss
round-trip min/avg/max = 3/3/3 ms
<Sysname>

flow-control

Use flow-control to configure the flow control mode.
Use undo flow-control to restore the default.
Syntax
flow-control { hardware | none | software }
undo flow-control
Default
The flow control mode is none.
Views
AUX user interface view, console user interface view
Predefined user roles
network-admin
Parameters
hardware: Performs hardware flow control.
none: Disables flow control.
software: Performs software flow control.
Usage guidelines
The switch supports only the none flow control mode.
data bytes, press a to break
22