History-Command Max-Size; Idle-Timeout - HP 6125XLG Command Reference Manual

[OK]

history-command max-size

Use history-command max-size to set the size of the command history buffer for a user interface.
Use undo history-command max-size to restore the default.
Syntax
history-command max-size size-value
undo history-command max-size
Default
The buffer of a user interface saves up to 10 history commands.
Views
User interface view
Predefined user roles
network-admin
Parameters
size-value: Specifies the maximum number of history commands the buffer can store, in the range of 0 to
256.
Usage guidelines
Each user interface uses a separate command history buffer to save commands successfully executed by
its user. The size of the buffer determines how many history commands the buffer can store.
To view stored history commands on your user interface, press the up arrow key or down arrow key or
execute the display history-command command.
Terminating a CLI session clears the commands in the history buffer.
Examples
# Set the size of the command history buffer to 20 for user interface AUX 0.
<Sysname> system-view
[Sysname] user-interface aux 0
[Sysname-ui-aux0] history-command max-size 20

idle-timeout

Use idle-timeout to set the session idle timeout.
Use undo idle-timeout to restore the default.
Syntax
idle-timeout minutes [ seconds ]
undo idle-timeout
Default
The idle timeout is 10 minutes.
24